My raid-10 speed seems slow when test using hdparm

See http://tldp.org/HOWTO/Software-RAID-HOWTO-9.html

To check out speed and performance of your RAID systems, do NOT use hdparm. It won't do real benchmarking of the arrays.

Instead of hdparm, take a look at the tools described here: IOzone and Bonnie++.

Esta resposta lhe foi útil?

 Imprimir este Artigo

Veja também

How to install lm_sensors on XenServer

This is tested on Xenserver 6, may also work on other similar OS 1. ssh to server as root 2....

How to install Windows VPS under Hypervm

After you follow this http://wiki.lxcenter.org/HyperVM-Windows and still problems below:1....

Why my drive is slow

First, check to make sure write cache is enabled. On Centos, you type hdparm -I /dev/sda Then...

Fix WHM/cPanel cPHulk Brute Force Protection Lock Out Via SSH

ssh to the server and login as root then type   mkdir /home/cphulkchmod 777...

How do I assign additional IP addresses in RedHat/CentOS?

If you are using CPanel, you should add the IP addresses through WHM.  Do not follow...